UnitekUSB 3.0 to IDE and SATA Converter External Hard Drive Adapter Kit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk, One Touch Backup Function, Included 12V/2A Power Adapter

Worked as advertised. Since I only needed this device to be able to access data on old hard drives, I did not need to download any software updates before use. It was simply, plug-n-play; that is, plug the hard drives into it using the tools provided, then plug the device into the USB port on my computer and it started working. It started reading one hard drive almost immediately upon connection, and it transferred the data faster than I expected. Another hard drive took a minute or so longer. I had to disconnect that hard drive and then reconnect it and it worked. Sharing that information just in case it happens to someone else; don’t despair, just try again. Compatibility was not an issue; it worked.The bottom line is, the device worked better than I expected - since I was afraid it wouldn’t work with my old IDE hard drives. Because the device allows you access to your data, if you want to back that data up somewhere, you can. I simply moved the data I wanted to keep from the old hard drives and placed it on a newer drive connected to my computer - which can arguably be considered a backup. But no software updates/downloads were needed to perform any of these tasks. One note: the device is plastic (hard though), so if you’re a heavy handed person, just be mindful of how you connect/disconnect the drives. The device does NOT appear fragile but I mention that only because it is plastic so just be careful. I would recommend this device.

This device and its companion parts is exactly what I needed to recover my documents from the hard drive of my old dead PC. The integrated video circuitry and multiple ports on the motherboard of my old PC finally died but the hard drive still spun up. I removed the hard drive from the old PC enclosure, plugged it into this device, connected the included power supply and USB cable. The new PC recognized the drive as a system disk and asked me if I wanted access to it. I responded yes and after a short wait for configuration was then able to copy all of my documents from the old drive to the new. Saved all of my Excel, Word, etc stuff that otherwise would have been lost because I was lazy about doing backups. Worked perfectly!

Yes, I almost returned it !It arrived earlier than expected, and I tried it with a 3.5 inch IDE drive that I know works with similar external USB-to-IDE control. It would not work, then started to work but Windows said it needed to be initialized ... but it did not complete it.The unit itself seemed well made and had good reviews, so I pursued another tack: it uses the same data type cable as my old Samsung Galaxy S5, so I tried it. THEN IT WORKED. I finished the initialization for MBR and formatted as FAT32 okay.Since I got it to work with my own cable, I was torn between returning it or just mentioning it in a review. I will try to provide a comparison photo later, if I am allowed, but the cable end that plugs into the Unitek unit has a groove that is too short to make a good connection; the cable does not go in all the way due to the cable itself. This is clearly seen holding both the Unitek and Samsung cables side by side.Anyhoo, I decided to keep the unit after all because it works 90%, and todays nightly news said many Kohl's stores will no longer be accepting Amazon returns. Writing this review, Unitek popped up a price reduction to $28 instead of the $35 that I paid. Oh well, times are hard and worse things are going on in the world LOL. The unit can be made to work.Unitek, send me a new USB3 data cable and I will change this to five stars

Had an older SATA hard drive that wanted to get data off of. Connected everything up, turned on power to the adapter, and computer showed new drive with everything on that hard drive. Only hassle was having to change the owner of some of the files and directories on that hard drive so I could access them.

⭐️⭐️⭐️⭐️⭐️I recently purchased the Unitek IDE & SATA to USB 3.0 Adapter, and it has been an absolute lifesaver for accessing old hard drives. As someone who frequently deals with data recovery and system backups, I needed a reliable, plug-and-play solution, and this adapter exceeded my expectations.Build Quality & DesignThe first thing I noticed was the solid construction—it feels durable and well-made, with a sturdy USB 3.0 cable that provides a stable connection. Unlike other adapters I’ve used, this one holds the drive securely, preventing accidental disconnects.Performance & CompatibilityFast Transfer Speeds: Thanks to USB 3.0, I was able to transfer large files quickly without lag or dropouts. It works flawlessly with both IDE and SATA drives, which is perfect for accessing old desktop and laptop HDDs.Wide Compatibility: It worked immediately on Windows, Mac, and Linux without needing extra drivers. I successfully recovered data from a 20-year-old IDE drive and a modern SSD with no issues.Plug & Play Simplicity: No complicated setup—just connect the drive, plug in the power adapter (for larger drives), and it’s ready to go.Bonus FeaturesOn/Off switch for safe drive operationLED indicator to show connection statusIncludes power supply, which is crucial for older IDE drivesFinal ThoughtsIf you need an easy, fast, and reliable way to access old hard drives, the Unitek IDE & SATA to USB 3.0 Adapter is a must-have tool. Whether you’re recovering lost data, cloning drives, or repurposing old HDDs, this adapter works flawlessly. Highly recommended for tech enthusiasts, IT professionals, and everyday users alike!✅ Pros: Fast speeds, reliable connection, works with both IDE & SATA, plug-and-play setup❌ Cons: None so far!Would definitely buy again if needed. 5/5 stars!

I had relatively low expectations for this device. However, it turned out to be truly plug-n-play! Off-loading data from old IDE drives couldn't be easier!