Linkstyle 4 in 1 Marine Switch Panel, 12V 4.2A Dual USB Charger Power Outlet with Cigarette Lighter Socket & LED Voltmeter ON Off Rocker Toggle Switch for Car

Easy to install, works as it should. Would recommend.

I bought this for a project that I was working on if you didn't come with any instructions but very easy to figure out if you know what you're doing if not I recommend YouTube switches are functional and overall very satisfied with the visual Aesthetics

Confused with the on/off switch? There are three tabs, 2 silver 1 brass. The 2 are positive, the one ground. Middle one is constant power, other one engages when switches on.Why is the on/off switch loose? So you can gently pop it out the front, run the wires thru the back, connect them with space, and snap it back in fully. Mine is nice and tight and the wiring was simple.**If you leave off the little black in line fuses like I did, make sure to use a fuse block, there$15 on Amazon.For those needing more info:The tab in the middle is for the power source to come in from the battery. The other same color feeds the 3 devices on the unit like the picture.I used heat shrink wrapped terminal connectors in 14-16 gauge blue color. $12 for 320 various onesI got rid of the fuses as all of my electric runs will be coming from a $15 12v fuse box with car fuses. Sold on Amazon, cheap and effective and with any issues you only loose power on that one run.The easiest way to do this is to work from the farthest from the on off switch, for me it was the cigarette plug in. Those get just one wire on the tab as it's the end. I then Daisy chained the rest together the same color going down the line . So double up the remaining wires, color to color. With the constant on/off switch power and ground I doubled up those so I can easily connect to my main supply coming from the fuse block.Hope this helps.

I wanted to build a power bank for a ham radio in an ammo box so I came up on this product and it had decent reviews. Everything went together pretty good. They’re just cheap Chinese connectors, but they should do the trick. It comes with the wires and, so that’s helpful. For the money it gets the job done.

parts were easy to install and quality was great.

The “panel” is flimsy plastic. Not what I was expecting.. I’d really call the panel a bezel. Otherwise it had what I needed but I had to fab a better backer for strength which was what I was hoping to avoid with it.

Nice panel

Worked great to make a portable power box for ham radio use in the field and to power accessories when power isn’t available or during a power outage. Mounted to the side of a Plano ammo box with a Talentcell LF1201ah rechargeable battery mounted inside. With no instructions included, I used the diagram from the Amazon description to wire it to the battery. I had to cut and splice the included wire to daisy chain the outlets. I fused the + and - terminals so wire coloring doesn’t match up because only the red wiring included had the fuses, but no big deal. Total cost to build the portable power box was $100. Luckily I live a mile away from Plano Molding, so I can get ammo cans for $3 vs $10 on Amazon!

Looks great, item as described. Some wiring instructions would have been helpful. Google fixed that.