Flip Up License Plate Mount Winch Roller Fairlead Mounting Bracket 8 3/4 Inch Holder Black Stainless Steel
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

Flip Up License Plate Mount Winch Roller Fairlead Mounting Bracket 8 3/4 Inch Holder Black Stainless Steel

4.2/5
Product ID: 138430745
Secure Transaction
🔩8 3/4" fitment
🛠️Easy installation
🛡️Durable protection
Frequently Bought Together

Description

🚗 Elevate Your Ride with Style!

  • INNOVATIVE DESIGN - Extra 4 mounting holes for diverse license plate options, making it a standout choice.
  • ROBUST PROTECTION - Safeguards your roller fairlead from debris, extending the life of your equipment.
  • VERSATILE FITMENT - Designed for 8 3/4" roller fairleads, ensuring compatibility with your setup.
  • PEACE OF MIND WARRANTY - Enjoy a 12-month warranty with hassle-free refund or exchange for ultimate confidence.
  • USER FRIENDLY OPERATION - Flip the bracket up or down effortlessly, adapting to your winching needs in seconds.

The Flip Up License Plate Mount Winch Roller Fairlead Mounting Bracket is a robust and versatile solution designed to fit 8 3/4" roller fairleads. With an innovative design featuring extra mounting holes, it allows for easy installation and adaptability. This durable bracket not only protects your equipment from debris but also comes with a 12-month warranty for added peace of mind.

Reviews

4.2

All from verified purchases

S**B

Almost but just short of a perfect solution

As others noted, the holes for plate mounting are off by about a quarter inch. This will be fine for folks in states with slots on their plates but those of us like California, will need to enlarge the holes on the license plate. also surprised the hardware for the clips interferes with the license plate sitting flush with the back plate. It’s a shame they cut corners here, a flathead screw and a counter sink hole would have made this a work of art. Still with spacers and a reamer I was able to get it installed.

A**R

Required license plate holder on front of vehicle

My state (Texas) requires a license plate on the front of the vehicle, and NO, not just on the dash! This fits right over the wench on front of my JK Jeep, and holds it steady. If I need the wench, I'll just pop it off, although you can install it where it just lifts up. Would recommend if you need a solution for the plate.

L**3

Works Well

This works very well and was easy to install.

S**L

Works good but needs some improvements

I would leave 5 star except for the following issues1) the tool shown in Step-3 of the install step, is NOT the tool you need. You need snap ring pliers to install2) the bolts that hold the clips that face the roller extrude on the plate side. So you either need to get spacers or you will bend your plates.

T**W

Awesome front tag holder for Jeeps

This is a great way to mount a front tag for vehicles with a front winch, specifically in my case, a Jeep Wrangler. While it is not a requirement to have a front tag in my state, I wanted to be able to mount a front tag and had previously been unable to with my aftermarket front bumper and winch. This flip-up plate works great!My only suggestion for the manufacturer would be to flip the bolt and nut that holds the roller clamps onto the plate itself. The way it came from the seller, the nut is positioned up, which keeps the tag from laying flat on the mounting plate. I purchased a pack of #10 washers from the local home improvement store and flipped the nut and bolt around, which provided a much closer mounting position for the tag. While the tag does not lay 100% flat against the plate, it is much better than the way the plate ships.

R**R

A little hard to install.

Liked the way it looks installed. If taking thru a car wash have them not use the roller brushes on the front of vehicle, it could cause damage to the license and holder.

A**R

Good, but plan to modify it a little

The good:-I didn’t have to replace the roller pins on my Smittybilt with bolts like the instructions say I might have to.-Unlike some other states, my state’s license plates holes are slots, so I could easily line up the holes.The not-so-good:-The bracket was shipped without any instructions. I didn’t discover that the instructions are on the Amazon photos until after I got it installed. It took me a while to puzzle out how the sprung attachments are supposed to attach.-I had to reverse the bolts and nuts on the clips and add washers between my license plate and the flip-up plate in order for the license plate to attach without bending (the hardware holding the clip to the flip-up plate aren’t flush with the flip-up plate).-I had to add washers behind the clips to square up the mount. The clips were just a little too short to reach the rollers.I like how this has bracket turned out, and I’m glad I bought it. But if I didn’t have a ton of washers of different sizes and materials, this would have been a pain and a trip to the hardware store to make it look right.

M**D

Arrived in a timely manner. Solid and perfect fit.

I love the stainless steel flip-up license plate holder.Being mostly painted (or powder coated?) stainless steel, it won't rust.It appears to have sturdy PEM nuts installed for the license plate bolts and the bolts are allen key bolts.The fairlead mounting holes line up perfectly with the C-clips at the top ends of the left and right fairlead roller shafts and there was sufficient play to clip the C-clips over the fairlead mounting points. There is some adjustment possible if the mounting points are differently spaced.It clips around the left and right rollers with a strong, tight grip so - No Rattle! Yet, it is not hard to pull it up.Its spring loaded hinges keep it up and out of the way of winching operations.Great product and great price!

L**N

The fit

This worked perfectly on my Jeep JK Warn winch. Now l can put my front license plate back on.

R**D

Nope. Don't go there

Spring clips no good for roller fairlead. Simply to small and nontension. Will not hold.Don't even bother...

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Currently out of stock

LEBANONstore

Sorry, this item from our LEBANON store is out of stock. We're restocking soon—check back or contact support for similar products.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Flip Up License Plate Mount Winch Roller Fairlead Mounting Bracket | Desertcart LEBANON