Deliver to LEBANON

For best experience Get the App

ATOPLEE 3 Phase Sequence Presence Rotation Tester Indicator Detector Meter with LED and Buzzer 60V~600V (3 Phase AC)

ATOPLEE 3 Phase Sequence Presence Rotation Tester Indicator Detector Meter with LED and Buzzer 60V~600V (3 Phase AC)

Q: Will this work on the output of a VFD?

Matthew, a vfd is a Variable Frequency Drive. they are used for phase shifting and/or voltage shifting. my father uses one to convert his 220 single phase to 480 3 phase for his mill in his home garage.

Q: Misplaced instruction. what color lead goes on line 1, line 2 and line 3? thanks

It actually doesn't matter as long as the phase sequence is right. Convention identifies each of the 3 leads as L1, L2, and L3. Your equipment will have terminals labeled as L1, L2, and L3. You would assume L1 goes to L1, L2 to L2 and L3 to L3. This is correct. However, you can also connect L1 to L2, L2 to L3 and L3 to L1. Surprise, you can connect L1 to L3, L2 to L1 and L3 to L2. Each of the 3 variations gives the same result and is correct. What does matter is the sequence. Each line will cycle to peak voltage in rotation. Thats why this is a Phase Sequence Rotation Meter. First L1 goes high, then L2, then L3. If you start with L2, then L3 and L1, each goes high in Rotation. Typically, equipment (a motor perhaps) expects to see "Clockwise" Rotation, sometimes called "Right Hand" Rotation. Should you wish to reverse rotation (for a motor) swap any 2 leads and you get "Counter Clockwise" Rotation, sometimes called "Left Hand" Rotation. Sometimes, one of the leads will register a slightly higher voltage to common/ground than the other two leads. This "Hot Leg" assists with starting a motor. Usually you need not pay any attention to this. Your equipment manual will tellyou if you do. Convention will call for the Hot Leg to be L1. So, hook up your tester, without regard to lead color. If It says "CW" rotation you're good. For convenience, call the Yellow lead L1, Green Lead L2 and Red Lead L3. Wire the associated power leads to the terminals designated L1, L2 and L3 on your equipment. You're good to go.

Q: I was just wondering why it will take so long to deliver. My friend purchased the same exact one from Amazon and it came in about 2 days

Supply chain delays, like everything else.

Q: i see the max voltage is listed for 600v will it survive 690 +/- 4% are the leads 1kv rated? i understand that it wont last as long on 690

I never used it on anything more than 480v. Couldn’t tell you if it would survive 690. As far as the leads being 1kv, it doesn’t say. Only states 600v rated.

4.5/5

Product ID: 26063134

Secure Transaction

Details

Brand
ATOPLEE
Power Source
Battery
Style
Compact
Color
Orange
Item Weight
0.33 Pounds

⚡2000 V/min

📏1m test leads

🔊LED & Buzzer

Frequently Bought Together

ATOPLEE 3 Phase Sequence Presence Rotation Tester Indicator Detector Meter with LED and Buzzer 60V~600V (3 Phase AC)

Klein Tools ET600 Multimeter, Megohmmeter Insulation Tester, 4000 Ohms Resistance, 125V/250V/500V/1000V, Auto-Ranging TRMS Multimeter

BTMETER BT-6688B Megohmmeter 200 Gig Ohm Digital Insulation Resistance Tester, 500V/1kV/2.5kV/5kV Test Voltage, Auto Ranging, Backlight Display

Description

🔧 Test with Confidence: Your Essential Phase Indicator!

🔄 SEQUENCE MASTERY - Easily detects phase conditions with visual and audio alerts.
⏳ TIME SAVVY TESTING - Max continuous use of 60 minutes at 60V AC.
🔋 POWER UP YOUR TESTING - Battery-powered for ultimate portability.
🔍 PRECISION MEASUREMENT - Operates within a wide frequency range of 20 Hz to 400 Hz.
🛡️ HIGH VOLTAGE PROTECTION - Withstands impulse voltage up to 4000 V.

The ATOPLEE 3 Phase Sequence Presence Rotation Tester is a compact, battery-powered device designed for professionals needing reliable phase condition measurements. With a voltage range of 60V to 600V and advanced features like LED indicators and a buzzer, it ensures accurate and efficient testing in various environments.

Specifications

Brand	ATOPLEE
Power Source	Battery Powered
Style	Compact
Color	Orange (Colour)
Item Weight	0.33 Pounds
Min. Operating Voltage	60 Volts
Measurement Type	Voltmeter
Maximum Operating Voltage	600 Volts
UPC	769700162806
Manufacturer	Atoplee
Part Number	12040027001
Item Weight	5.3 ounces
Package Dimensions	7.91 x 5.24 x 2.24 inches
Item model number	12040027001
Is Discontinued By Manufacturer	No
Size	Instrument size: 85x64x23mm
Material	plastic
Item Package Quantity	1
Batteries Included?	No
Batteries Required?	No

Have a Question? See What Others Asked

Will this work on the output of a VFD?

Misplaced instruction. what color lead goes on line 1, line 2 and line 3? thanks

I was just wondering why it will take so long to deliver. My friend purchased the same exact one from Amazon and it came in about 2 days

i see the max voltage is listed for 600v will it survive 690 +/- 4% are the leads 1kv rated? i understand that it wont last as long on 690

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

$78.56

Duties & taxes incl.

LEBANONstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

Point your camera to download the app

Customer support

We're available 24/7 to help you!